ITH Reel Keeper - Machine Embroidery - In The Hoop - Fishing

This is a MACHINE EMBROIDERY DESIGN - not a finished physical item. You must have an embroidery machine to stitch this design out.

Since I use vinyl to make mine, vinyl is cushioned with cotton backing so I do not find it necessary to put the 2nd piece of fabric on it. That's just my preference!

ITH Reel Keeper

THIS ONLY FITS A 7X12 HOOP OR LARGER!!! NO REFUNDS!

Number of different colors used in sewout: 3

Size 3 (3/8) "(w) X 10 (1/4)(h)

Total Stitches: 2655

CC1: Black Brother Poly 900 CC2: Blue Brother Poly 420 CC3: Red Brother Ploy 800

 DIRECTIONS: Stitch 1: Placement stitch. - This will tell you where to lay your fabric/vinyl over to cover. Stitch 2: This is a double stitch and will tack down the fabric/vinyl. Stitch 3: Take your hoop off the machine but do NOT remove the item from the hoop! Flip the hoop to the backside and tape your fabric/vinyl to the bottom side of the hoop covering the whole stitch area with your pretty side fabric facing the plate of your machine. Place the hoop back on the machine and stitch the 3rd step. After stitching. Tear away all tear away stabilizer and trim the design. Add your snaps where the placements are. Voila! You have just made your honey an awesome Reel Keeper to his reel doesn't get dusty/dirty!

Since this is a digital file, NO refunds will be given. However, if there is a problem with the design, please contact me and I will be of assistance. You are purchasing a DIGITAL machine embroidery file that will be emailed to you upon completion of payment. NO physical item(s) will be sent to you. This design will be sent in the following formats: DST, EXP, HUS,JEF, PES, VIP, VP3, XXX, PCS. Please let me know if you desire a different file format.